A tried and true camber profile that offers a precise feel, predictable turns, solid edge hold, suspension and powerful pop. Traditional camber distributes weight evenly and offers a progressive flex pattern.
The Float Camber on a directional setback board is a true cambered profile with an early rocker raised nose.
CamRock features a loaded camber section between the feet with a small flat section underfoot and rockered tips. The camber section maintains stability between the feet, while the flat areas underfoot let you load up ollies and the rockered tips offer forgiveness. This creates a very playful, easy turning board.
The Backseat CamRock design places rocker in the nose and a slight amount in the tail with positive camber in between. This setback design delivers camber stability and control between the feet and in the tail, with the added float and manoeuvrability of
the rockered nose.
Constructed from four different lightweight wood species—paulownia, spruce, beech and poplar—for a premium core that offers a highly tuned and dynamic feel. It’s flyweight, durable, filled with pop and highly reactive.
Arranged with premium strips of poplar for a lightweight and smooth flex with added beech hardwood stringers tip to tail through the inserts for power transfer and durability.
Crafted with light density paulownia for lightness, poplar for responsiveness and hardwood beech stringers along the edges to increase core durability, pop and protection from edge impacts.
Triax fiberglass is the time-tested classic. It features a three-way weave of premium fibers with strands running at 45-degree angles. It provides superior pop, consistent torsional flex, and more overall response.
Biax fiberglass is a two-way weave of fiberglass with strands running every 90-degrees. It’s more forgiving, easier to flex and highly versatile for all terrain types.
This is our ultimate truss of carbon, Kevlar and basalt fibers. The effect is lightness because the connecting strength of fiber allows us to slim the core’s thickness. With our strategic placement this gives certain liveliness to the board by adding response to the tips and leaving torsional softness between the feet.
Two carbon fiber stringers stretching outward from the inserts to the contact points in both the tip and the tail. Like prongs sticking outward these additives feel out rough terrain, promote pop, generate stronger edge hold and create a more playful ride.
Strips of Kevlar and carbon fiber placed from the inserts to the tips in the nose and tail to support landings and reduce washouts. This design also helps dampen high-speed chatter, offer stability at speed and load up potent ollies.
Pure carbon fiber slabs placed in a cross pattern under the inserts between the base and the core to enhance responsiveness, pop, torsional stiffness and amplify foot movement.
Carbon weighs less than traditional fiberglass and it has a higher load capacity and stronger tensile strength that’s less susceptible to delamination, too. All of this translates into a snowboard that’s lighter, snappier and more powerful than anything else on the market.
Our progressive sidecut design blends many radii and smooth contact points for buttery smooth turn initiation, edge-to-edge transition and edge hold. It’s different for each model and matches the sidecut to the board’s specific camber profile.
A predictable and powerful sidecut with a single radius that makes for consistent turns. It’s ideal for intermediate and advanced riders who already know how to carve a turn, like to ride fast, and desire strong edge hold.
This multi radii directional sidecut is deeper at the tail end for explosive turns. Combined with the Aurora’s dual camber and flex design it allows the rider to accelerate swiftly when pointed forward with weight on the front foot. At the same time it allows the back foot to maintain control and steering.
SINTERED HD BASE 7200
The fastest and hardest sintered base on the market. It provides the most impact resistant surface available and its high-density molecular structure holds wax longer for sustained speeds.
SINTERED BASE 6000
This extruded base with same properties of sintered quality is fast, durable and requires less waxing. We believe in using the best possible materials in our boards.
SINTERED NHS RACE BASE
High performance ultra high molecular sintered race base with the additon of graphite. Premium base material with the best gliding charactersitics and optimal durabilty.
EXTRUDED BASE 4800
Extruded low-density running base material accepts wax well and absorbs blunt shocks extra.
The belt finish gets your base optimized before it’s fully waxed.
DIAMOND STONE FINISH
We add a slight diamond-structured stone grind to the base to maximize glide and optimize durability. It eliminates the slow, suction cup feel that comes with one-dimensional base finishes.
All Slash boards are factory waxed with OneBallJay wax and ready to shred straight out of the wrapper.
Our Identity shape saves material and weight and also stands up without tipping over like rounded boards do!
Thin, light and surprisingly strong aluminum protectors that cap the base and edge at the tip and tail to protect the board from impacts.
S-Line split edges down the middle of the board are dual purpose; providing shear force when put together and added bite to the outside edge when in hike mode on icy skin tracks. Quite like our Traction Bump.
We build our edges with 35% more steel content than the average. They are simply stronger and more durable than the alternative.
This small counter radius (bump) placed in the middle of the board’s sidecut improves edge hold without creating drag or strange edge grip. It adds extra bite on ice and turns regular turns into confident carves.
An extra set of inserts set way back for those super deep days.
A vibration dampening rubber used between the steel edge and the sidewall. Absorbs impacts only to a very small degree, its main purpose is to act as an adhesion layer between the edge and sidewall to prevent the possibility of delamination.
SLICK TIP PROFILE
This reduces the core and sidewall thickness at the tips for a board with lighter swing weight, better dampening properties and provides a unique feel in turn transitions.
The width of the nose is greater than the tail width. Tapered directional shape is usually designed to provide the best float in powder – promoting the tail to sink and the nose to rise.
This is our custom method of core milling that’s highly visible on the Aurora. Using a CNC machine we precisely carve out material between the bindings. This makes the core lighter and the sidewall thinner to promote independent flex. The board has a more intimate feel and gives you better edge control.
SLASH SNOWBOARDS OFFERS A 2-YEAR WARRANTY AGAINST MANUFACTURER’S DEFECTS. FOR FURTHER
WARNING > Snowboarding can be dangerous!
Slash Snowboards, it’s distributors and retailers are neither responsible, nor liable, for any injury or accident caused by use or misuse of our products.
Please do not hesitate to contact us.